To preserve the color and shape of the garments, it is advisable to follow the garment maintenance recommendations found on the attached labels and tags. Before starting maintenance, read the information on them in detail in the form of pictograms.

Do not forget the correct temperature during washing!

  • Always wash clothes at the temperature specified by the manufacturer. See the label for information;
  • Wash functional thermal underwear and clothes at a temperature lower than 40 degrees. The clothing will retain its properties and will not shrink
  • Pay attention to the color of the washed clothes:
    • White clothes are washed with white pieces, black and colored with similar colors
    • Wash darker and jeans clothes from the back
Use suitable detergents for washing
  • For black clothing, use dark clothing
  • Only wash technical and functional clothing with specially designed sportswear detergents. This avoids blocking the membranes. Do not use plasticizers or bleaches.
  • The washing of lava lava with specific specifics per capillary cap.

Remember that different types of clothing require different handling when washing

  • Pay attention to the speed during centrifugation. Excessive can deform the shape of clothing. Follow the manufacturer's instructions.
  • Wash your underwear in a separate, specially designed bag. Then the hooks or skeleton will not damage other parts of the laundry.
  • Do not use spin during washing of technical and functional clothing.

Drying, ironing, storage

  • Observe the temperature specified by the manufacturer during ironing. See the label for information. It is best to iron on the left side.
  • Follow the manufacturer's recommendations during drying.
  • Only dry clean if indicated on the label.
  • Do not dry thermoactive clothes in the sun. This can cause clothing to fade or shrink.
  • Natural furs are best stored in cotton wrappers. Above all, avoid contact with water. If necessary, dry the fur in a well-ventilated area, away from heaters and radiators. Do not use detergents for natural fur.
  • Do not spin knitted or knitted garments and dry them spread out in a horizontal position. We recommend drying between two towels: change the towels until the knit is dry, then spread them out on a clean towel or blanket into the desired shape.

Basic rules for shoe maintenance

1. Be sure to untie the laces while putting on and taking off the shoes. As a result, the upper part of the shoe will retain its shape and the heel part will not bend and deform.

2. Avoid damaging the shoes during incorrect putting on. Use a shoehorn. You will find it in the shipment together with your order.

3. Avoid soaking and sweating shoes. Even properly maintained footwear can get wet in rain or wet snow, so in these conditions it will be best to use footwear marked as Waterproof. If the shoes have already been soaked, try to dry the shoes at room temperature, avoid drying on a radiator or other heat source. Remember that the seller is not liable for defects caused by external factors, unless the shoes are intended for use in such conditions.

4. If you have chosen leather shoes without lining or with natural colored lining, the sock may become discolored. It is a natural and transient process. There is no discoloration in shoes with synthetic lining.

5. The replacement of worn laces, as well as the care of the inside of the shoe (replacement of insoles) remains in the interest of the customer and therefore does not constitute a basis for complaints.

6. Use footwear according to the purpose: for example, domestic footwear is used in closed and dry rooms and sports footwear is suitable for surfaces intended for this purpose.

7. Full leather and glued leather heels require the same maintenance as the upper part of the shoe.

8. Shoes marked: Waterproof and Water Resistant regularly impregnate to maintain the waterproof properties of the technologies used.

Do you maintain and impregnate shoes? Find out if you take proper care of your shoes!

The technical condition of footwear depends on its proper care. You should start this process before using it for the first time. We recommend that new shoes be thoroughly impregnated before use. For this purpose, apply an even layer of impregnation product to each type of leather or other material. Before use, make sure that the shoes are not wet or damp. Impregnation should be repeated regularly, especially after each wet cleaning. Avoid polishing still wet shoes or excessive spraying of impregnation spray.

Remember that over time - due to mechanical wear of the shoes or weathering - the effect of impregnation is partially eliminated. It is a natural process that inevitably leads to a reduction in the quality of footwear and is largely independent of its quality. However, this is why it is necessary to make sure that the products protecting your shoes are of the best quality and contain correctly selected substances and oils, which together with the appropriate dyes refresh and protect the shoes. leather from which the footwear was made.

Leather - effective maintenance methods

Leather, like any other natural material, does not have to be the same color and texture all over the surface. Possible differences in color or texture result from its natural heterogeneity.

About handbags and backpacks
Do not wash or overload handbags and backpacks - know the rules for their maintenance

1. Use handbags and backpacks, as well as shoes, according to their purpose. Remember proper and regular maintenance.

2. Be careful not to overload or strain the material, as this may damage sensitive items such as handles, earbags and straps.

3. To maintain the aesthetic value of your handbag or backpack for as long as possible, avoid prolonged rubbing against other surfaces and do not expose it to sharp and rough objects that can cause abrasions or other mechanical damage.

4. Store products appropriate to the material from which they were made. Washing in a washing machine or mechanical cleaning can damage the product and thus cause the complaint to be rejected.